سيرتك الذاتية

اذا كنت مهندس او مصمم

او  رسام هندسي

او ائ مهنة تتعلق بموضوع المدونة و زوارها

انسخ و الصق سيرتك الذاتية

و ان شاء الله اذا رزقت بفرصة عمل متنسناش بدعوة

اذا استمتعت بهذه التدوينة , اشترك في تغذية خلاصة الموقع  الخاصة بي

81 تعليق

  1. NABIL KORANY SAYED MANSOUR ALGARHY
    DATE OF BIRTH : 30 April 1978
    E-MAIL :mokhtar_garhy@yahoo.com
    PRESENT ADDRESS : 5th Aid Aoda St. Shobra Alkhyma –Kalyobia, Egypt.
    TEL. NO. : Home: 002-02-44740919
    Mobile: 002-01225823832
    NATIONALITY : Egyptian.
    MARITAL STATUS : Married.
    PROFESSION : Senior Engineer Surveyor for
    1- Senior Engineer for Infrastructure Utilities Systems.
    2- Senior Engineer for All Road Works, Earth Works, Concrete Works.
    3- Senior Engineer for Equipments.
    4- Senior Engineer for Hardscape and Softscape and Structure.
    LANGUAGE :

    o ARABIC. (Mother tongue).
    o ENGLISH. (Good written and spoken).
    COCMPUTER SKILLS :

    o AUTOCAD V2005, V2007, V2008.
    o OFFICE 2007 (WinWord, Excel, PowerPoint…Etc.)
    o LAND DESKTOP Software for Quantity Survey for Roads Works.
    o SEUFER 8 Software For Quantity Survey Works.
    EDUCATION

    o UNIVERSITY : High Institute For Irrigations, Drainage And Surveying
    o DEGREE : General Surveying, Jun 1997
    o PROJECT GRADE : Very Good.
    o MAJOR SUBJECT : Sanitary Engineering.

    KEY QUALIFICATION :
    o Over fourteen years experience in the field of surveying, With Specific attention to, Domestic Water Network Systems, Domestic Waste-Water Networks Systems, roads works, gulf areas, natural gas networks.
    o Experience with surveying works for all infrastructure systems.
    o Experience with driving for several site heavy duty trucks.
    o Experience with earth works including all levelling and excavations and backfilling.
    o Experience with concrete and steel works.
    o Skilled in computers, including, TOTAL STATION, GPS.

    EMPLOYMENT HISTORY:

    ** From March 2013 up-to-date: (Full Time)
    Sites International for Engineering Consultancy (SITES .INT.)

    POSITION : Senior Engineer Surveyor for Mivida Project
    Hardscape and Softscape and Structure.

    ** From March 2011- To February 2013: (Full Time)
    SHAKER Consultancy Group (SCG)

    POSITION : Senior Engineer Surveyor for Allegria Project
    Infrastructure Systems Including Water Networks, Waste-Water Networks, Natural Gas, Golf Areas
    JOB DUTIES:
    o Surveying systems of all infrastructure utilities systems ( water, wastewater, irrigation, storm, golf

    ** From March 2007- To February 2011: (Full Time)
    SAUDI DESIGNERS ENGINEERING CONSULTANTS (SDEC)
    ( K.S.A )
    POSITION : Engineer Surveyor
    Infrastructure Systems Including Water Networks, Waste-Water Networks.
    JOB DUTIES:
    o Surveying systems of all infrastructure utilities systems ( water, wastewater, irrigation, storm, for several projects located in K.S.A such as Sehat, Katif, naeria, etc….
    o Surveying systems of all utilities for specialist projects located in K.S.A such alamal hospital in damam, etc….
    o Surveying systems of all infrastructure utilities systems (water, wastewater, irrigation, storm, for residential projects located in K.S.A such as hafr albaten, etc….
    o Follow up execution supervision of water and Waste-Water networks.
    o Participation in Coordination with other systems Such as structural features, electrical, etc.
    o Surveying systems of all infrastructure utilities systems, for electrical projects located in K.S.A such as alalia, nairia, etc….
    ** From Jan. 2004- To February. 2007 : (Full Time)
    ALSAMAN FOR ENGINEERING WORKS AND CONTRACTING

    POSITION : Engineer Surveyor
    Infrastructure Systems Including Water Networks, Waste-Water Networks.

    JOB DUTIES:
    o Surveying systems of all road works (levelling, excavation, and backfilling) for several projects located in Egypt such as west desert road, east desert road, and helwan alkorimat road. etc….

    ** From Jan. 2002- To Dec. 2003 : (Full Time)
    GOLF ALSOLIMANIA PROJECT

    POSITION : Engineer Surveyor
    Infrastructure Systems Including Water Networks, Waste-Water Networks.

    JOB DUTIES:
    o Surveying systems of all road works utilities ( levelling, excavation, backfilling)
    o Surveying systems of all infrastructure utilities systems ( water, wastewater, irrigation, storm, golf
    o Surveying systems of all infrastructure utilities systems lakes.
    o Follow up execution supervision of water and Waste-Water networks.
    o Participation in Coordination with other systems Such as structural features, electrical.

    ** From Jan. 2000- To Dec. 2001 : (Full Time)
    HASSAN ALLAM SONS

    POSITION : Engineer Surveyor
    Infrastructure Systems Including Water Networks, Waste-Water Networks.

    JOB DUTIES:
    o Surveying systems of all concrete works ( levelling, landscape, backfilling)
    o Participation in Coordination with other systems Such as structural features, electrical.

    POSITION : Engineer Surveyor for Media Production City
    Infrastructure Systems Including Water Networks, Waste-Water Networks.

    JOB DUTIES:
    o Surveying systems of all road works utilities ( levelling, excavation, backfilling)
    o Surveying systems of all infrastructure utilities systems ( water, wastewater, irrigation, storm,
    o Follow up execution supervision of water and Waste-Water networks.

    ** From Dec. 1997- To Dec. 1999 : (Full Time)
    DREAM LAND PRJECT

    POSITION : Engineer Surveyor
    Infrastructure Systems Including Water Networks, Waste-Water Networks.

    JOB DUTIES:
    o Surveying systems of all road works utilities ( levelling, excavation, backfilling)
    o Surveying systems of all infrastructure utilities systems ( water, wastewater, irrigation, storm, golf
    o Surveying systems of all infrastructure utilities systems lakes.
    o Follow up execution supervision of water and Waste-Water networks.
    o Participation in Coordination with other systems Such as structural features, electrical.

    إعجاب

    1. Profile
      Name: Walid El-sayed Samir Mohamed El-sibai
      Birth Date: 10/12/1989
      Nationality: Egyptian
      Marital Status: Single
      suez canal university faculty of engineering
      Mechanical power Engineer

      Graduation Year: 2014

      Contact Information
      Phone: +02 01065655031
      Email: eng.walid54@yahhoo.com
      Website: http://engwalid.blogspot.com
      Website: https://www.facebook.com/elsibai

      Address: Ismailia – Al-Kantara East

      Work
      Experience
      Instructor Engineering designs – Syndicate Practitioners (2011 – 2013)

      . Observer maintenance – al-abd company (2004 -2007)

      Education
      – Industrial Secondary School (2004 – 2007)
      – Technological colege (2007 – 2009)

      – Faculty of Engineering (2009 – 2014)

      Skil
      Autodesk Autocad 2D 2013 with Drafting Mechanical – Experience 6 years
      – Autodesk Autocad3D 2013 with Drafting Mechanical – Experience 6 years
      – Autodesk inventor 2013 with Drafting Mechanical – Experience 3 years
      – solid works 2013 with Drafting Mechanical – Experience 3 years
      – CATIA V6 Essentials – Experience 2 years
      – HAP – Carrier Professional – Experience 2 years
      – Hydraulic circuit design Professional – Experience 2 years

      – Pneumatic circuit design Professional – Experience 2 year

      Training
      – EgyptAir
      – Water pumping station in Sinai

      – Power plant Abu Sultan

      Languages
      – Arabic excelent
      – English good

      إعجاب

  2. C.V

    MAHMOUD SABRY ABDELHAMED

    ADDRESS
    • Shoubra El Kamiah-Qaliobia – Egypt
    • REFAA- BAHRAIN
    • Tel: +20 124226992 (Egypt)
    • E-mail (engmahsabry@GMAIL.com)
    • +973 36723148 (Bahrain)
    PERSONAL INFORMATION

    • Date of Birth: 18/07/1976.
    • Gender: (Male)
    • Marital Status: (Married)
    • Nationality: Egyptian
    • Military Service: Done

    QUALIFICATION:

    • Zagazig University, Egypt
    • Mechanical Power Engineering (Refrigeration and Air Conditioning) (2003)

    EXPERIENCE

    G R I D E N G I NE E R I N G – BAHRAIN (DESIGN & ENGINEERING SERVICES)

    Position: Mechanical Engineer & site coordinator May 2011 up to now

    For the following projects:-
    • DREAM BODY Center (Giant Mall)

    Duties and Responsibilities
    – Site coordination between services.
    – Site supervision.
    – Snag list for (drainage system, water service system and firefighting system).

    • Gated Community Compound At Al Zallaoq ( 24 villa , 18 town house, club house ,supermarket , gate house and post office)

    Duties and Responsibilities
    – Project auditor (MEP).
    – Snagging list for (sewage system – water services system-air conditions syatem and firefighting system) and its follow-up completed until completed.

    • Gated Community Compound At Al Zallaoq ) Zallaq administration building(
    – Not start yet.

    • AL HASSA TOWER (KSA)

    Duties and Responsibilities

    Participation in the design (sewage system – water services system – air conditions system and firefighting system)

    • AL KHOPER TOWER (KSA)
    Duties and Responsibilities

    Participation in the design (sewage system – water services system – air conditions and firefighting system)

    AL HAMAD CONSTRUCTION & DEVELOPMENT CO W.L.L. (BAHRAIN) PRECAST AND STEEL DIVISION.

             As a Mechanical Engineer (steel workshop incharge)  
    

    For the following projects :-
    • Marina west project.
    • Reef island project.
    • Villa mar project.
    • AL- HAMAD Labor camp. Project.

    Scope of works :-
    • S.S AND M.S WORKS.
     S.S & M.S ladders.
     Sky lights.
     Factory gates.
     S.S accessories.

    As a quality control engineer and ISO system coordinator.
    June 2008 up to May 2011
    • Help the quality team to prepare the ISO process.
    • Make quality system for the production line.
    • Make quality points during and final product to archive the required quality.
    • Working as a part of the production team to make sure the operations done under the ISO systems.
    • Check the document for all department to make sure it run under the ISO system
    • Coordinate between the quality Bahrain area manager and our division to applying all quality required
    • Make filling system for the WIR

    Nouval Group FOR Home accessories, Cairo, Egypt

    Help the team to achieve an (ISO 9001:2000) & (CE-Marking) Certificate. June 2007 up to June 2008
    • Help the quality team to prepare the ISO process.
    • Applying the CE requirement on the company products.
    • Issue the cost of poor quality meeting.
    • Issue the quality department for first time.
    • Make the check lasts for the final product.

    NTT FOR LIGHTING Cairo, Egypt

    As a quality control engineer and ISO system editor. June 2006 up to June 2007
    • Help the quality team to prepare the ISO process.
    • Make system for production.
    • Working as a part of the production team to make sure the operations done under the ISO systems.
    • Make the check lasts for the final product.
    ALIAA GROUP FOR Engineering equipment, Cairo, Egypt

    As a quality control engineer and preparing the ISO document for all departments. June 2005 up to 2006
    • Help the quality team to prepare the ISO process.
    • Make quality system for the receiving material.
    • Make the acceptance criteria for the receiving material.
    • Make the check lasts for the final product.
    ADDITIONAL QUALIFICATION
     Approved Awareness (ISO 9001:2000) Training from IMC Egypt.
     (ISO 9001:2000) Internal Auditor Training from IMC Egypt. Sept. 2006
    LANGUAGES:
     Arabic: Mother tongue.
     English: Very good written and speak.
     Hindi: Fair.
    COMPUTER SKILLS:
     Microsoft Windows.
     Microsoft office (Word, Excel, Power Point).
     Internet searching.
     AutoCAD 2d
     Autodesk Revit Architect 3D.
     Autodesk Revit MEP 3D.
    Other references are available upon request

    إعجاب

  3. C.V

    MAHMOUD SABRY ABDELHAMED

    ADDRESS
    • Shoubra El Kamiah-Qaliobia – Egypt
    • REFAA- BAHRAIN
    • Tel: +20 124226992 (Egypt)
    • E-mail (engmahsabry@GMAIL.com)
    • +973 36723148 (Bahrain)
    PERSONAL INFORMATION

    • Date of Birth: 18/07/1976.
    • Gender: (Male)
    • Marital Status: (Married)
    • Nationality: Egyptian
    • Military Service: Done

    QUALIFICATION:

    • Zagazig University, Egypt
    • Mechanical Power Engineering (Refrigeration and Air Conditioning) (2003)

    EXPERIENCE

    G R I D E N G I NE E R I N G – BAHRAIN (DESIGN & ENGINEERING SERVICES)

    Position: Mechanical Engineer & site coordinator May 2011up to now

    For the following projects:-
    • DREAMBODY Center (Giant Mall)

    Duties and Responsibilities
    – Site coordination between services.
    – Site supervision.
    – Snag list for (drainage system, water service system and firefighting system).

    • Gated Community Compound At Al Zallaoq ( 24 villa , 18 town house, club house ,supermarket , gate house and post office)

    Duties and Responsibilities
    – Project auditor (MEP).
    – Snagging list for (sewage system – water services system-air conditions syatem and firefighting system) and its follow-up completed until completed.

    • Gated Community Compound At Al Zallaoq )Zallaq administration building(
    – Not start yet.

    • AL HASSA TOWER (KSA)

    Duties and Responsibilities

    Participation in the design (sewage system – water services system – air conditions system and firefighting system)

    • AL KHOPER TOWER (KSA)
    Duties and Responsibilities

    Participation in the design (sewage system – water services system – air conditions and firefighting system)

    AL HAMAD CONSTRUCTION & DEVELOPMENT CO W.L.L. (BAHRAIN) PRECAST AND STEEL DIVISION.

             As a Mechanical Engineer (steel workshop incharge)  
    

    For the following projects :-
    • Marina west project.
    • Reef island project.
    • Villa mar project.
    • AL- HAMAD Labor camp. Project.

    Scope of works :-
    • S.S AND M.S WORKS.
     S.S & M.S ladders.
     Sky lights.
     Factory gates.
     S.S accessories.

    As a quality control engineer and ISO system coordinator.
    June 2008 up to May 2011
    • Help the quality team to prepare the ISO process.
    • Make quality system for the production line.
    • Make quality points during and final product to archive the required quality.
    • Working as a part of the production team to make sure the operations done under the ISO systems.
    • Check the document for all department to make sure it run under the ISO system
    • Coordinate between the quality Bahrain area manager and our division to applying all quality required
    • Make filling system for the WIR

    Nouval Group FOR Home accessories, Cairo, Egypt

    Help the team to achieve an (ISO 9001:2000) & (CE-Marking) Certificate. June 2007 up to June 2008
    • Help the quality team to prepare the ISO process.
    • Applying the CE requirement on the company products.
    • Issue the cost of poor quality meeting.
    • Issue the quality department for first time.
    • Make the check lasts for the final product.

    NTT FOR LIGHTING Cairo, Egypt

    As a quality control engineer and ISO system editor. June 2006 up to June 2007
    • Help the quality team to prepare the ISO process.
    • Make system for production.
    • Working as a part of the production team to make sure the operations done under the ISO systems.
    • Make the check lasts for the final product.
    ALIAA GROUP FOR Engineering equipment, Cairo, Egypt

    As a quality control engineer and preparing the ISO document for all departments. June 2005 up to 2006
    • Help the quality team to prepare the ISO process.
    • Make quality system for the receiving material.
    • Make the acceptance criteria for the receiving material.
    • Make the check lasts for the final product.
    ADDITIONAL QUALIFICATION
     Approved Awareness (ISO 9001:2000) Training from IMC Egypt.
     (ISO 9001:2000) Internal Auditor Training from IMC Egypt. Sept. 2006
    LANGUAGES:
     Arabic: Mother tongue.
     English: Very good written and speak.
     Hindi: Fair.
    COMPUTER SKILLS:
     Microsoft Windows.
     Microsoft office (Word, Excel, Power Point).
     Internet searching.
     AutoCAD 2d
     Autodesk Revit Architect 3D.
     Autodesk Revit MEP 3D.
    Other references are available upon request

    إعجاب

  4. Abd El-Raouf Mohammad Sayed | رد

    Abd El-Raouf Mohammed Sayed
    Mechanical Engineer
    Personal Information:
    Date of Birth : 1/11/1990.
    Marital Status : Single.
    Address1 : Assuit, Dayrout.
    Military situation : finally exemption.
    Mobile : (+2) 01004765018.
    E-mail : abora7maa@yahoo.com
    abora7ma2013@gmail.com
    Career Objective:
    A mechanical engineering position in a fast growing organization which need a young dynamic qualified person to help in the development of production & to have the ability to visualize changes and implement possible improvements so as to compete in the market. Educations:
    July 2012 Bsc. Of Mechanical Engineering, Design and Production Sec.
    Assiut university, Assiut, Egypt, ( Very Good )
    Graduated Project:
    Design and Manufacturing a Spray Drying Units (Turn the juice into powder)
    Grade: Excellent.
    Job Role:
     Leader in the designing of the chamber of the unit.
     Supervise the manufacture of the chamber of the unit in the workshop.
    Experience:
    Office engineering consultant: Industrial Technology Transfer Unit (ITTU).
    Position: Mechanical Design and Production Engineer and Solidworks Designer.
    Experience of six months in the field of engineering consultancy.
    Job Role: Design, Constructing and Manufacturing for a big project for different industrial field. June 2012 – Jan. 2013
     Supervising the design, manufacture and installation of Autoclave device for the chemical lab in faculty of science.
     Modify the design in accordance with the requirements of the new interaction at (pressuring and temperature).
     Supervise the manufacturing of the device in the workshop and installed it.
    APIC – Elsaad Company: Subcontractor in Several International Companies
    Position: Site Engineer and Solidworks Designer and Drawer.
    Job Role: Manufacturing and Fixing Steel Structure silos cement and frame work steel structures in VENCE Company.
    March 2013 – June 2013.
    Certificates:
     Autodesk AutoCAD – Core.
     Certified Solidworks Professional CSWP ” Certificate ID: C-RBWH7TTTAU “. (Designing).
    o Advanced Surfaces.
    o Sheet Metal.
    o Weldments.
    o Mold Design.
    o Advanced Part & Assembly Modeling.
    o Solidworks Simulation Advanced & FEA.
    o WorkShop Drawing & Sheets.
     Autodesk REVIT “MEP 2013 , Structure , Architecture”.
     Fire Fighting Design.
     Courses in soft skills.
    Skills:
     Leadership and well organized.
     Capable of decision-making and dealing with crises.
     Dealing with many labor styles.
     Computer Knowledge: Windows, Excel, word and power point.
     Working under pressure and working in a team.
     Respect time and work schedules.
    Language Skills:
      Arabic, Mother Language.
     English,
     Listening: good
     reading: very good.
     Speaking: good.
     Writing: very good.
    Availability and Job Requested
    Availability:
    I am able to start work after 0 weeks from announcement
    As:
    Full Time
    Rank:
    Unspecified
    Job location:
    Egypt- Arab Countries – Foreign Countries
    References:
    – Prof.Dr Mohammed Jad El-Sebaey (Prof. at faculty of engineering) Assiut University
    (01003341146).
    – Dr. Abd El-Rasoul Mahmoud Gad (Assistant Lecturer at faculty of engineering) Assiut University, but he now lives in Japan, Tokyo University.
    (abdelrasoulgad@yahoo.com , ammgad@aun.edu.eg , abdelrasoulgad@hotmail.com ).

    إعجاب

  5. Hebatullah Mohamed elsayed
    17b Abdel Moneim Sanad St ,elsalam 1, seuz, Egypt
    Email: eng_heba82005@yahoo.com

    OBJECTIVE

    To obtain a responsible position within the Technical Office department where my academic background, experience and personal skills allow me the opportunity of growth.

    EDUCATION

    Bachelor of Engineering, Civil Department 2004
    Faculty of Engineering, Zagazig University

    SUMMARY OF SKILLS

     Proficient in use engineering programs.
     Ability to work under pressure
     Good in handling problems
     Able to learn new tasks quickly
     Ability to work individually and as a co-operative team member
     Proficient in use of Microsoft Office and Internet

    COMPUTER SKILLS

    • AutoCAD 2006,2007,2008
    • SAP 2000
    • Primavera(P3,P6)
    • Word
    • Excel
    • PowerPoint
    • Internet Explorer

    LANGUAGES

    Arabic – Native language.
    English – Good in both written and spoken.
    French- Fair.

    PROFFESSIONAL EXPERIENCE

    Technical Office Engineer March 2011 to Present
    East Delta Electricity Production Project (establishment of a power station Ain Sokhna 1300 MW – establishment of a power station Suez 650 MW)
    -(Review contracts /Coordination between Arch, Civil E/M DWG. / Reviewing the time schedule/ discuss and suggest technical proposals/ performance and payments)
    civil Engineer Nov. 2007 to Feb. 2011
    General Authority for Educational Buildings
    (inspection and receipt of Civil and finishes Works / expense amounts / cost estimation )

    RELEVANT TRAINING

    Training Course on Construction Supervision Oct. 2009
    (Housing & Building National Research Center)

    • Quality Control for concrete works
    • Drawings Reviewing & Drawings details
    • Documentations & Submit the works
    • Methods of construction
    • Coordination bet. Diff. departments & applying the time schedule
    • Reports
    • Special Forms
    • Construction Deficiency & Methods of repairing it

    PERSONAL DATA

    Marital Status: Married.

    إعجاب

  6. ابراهيم حسين محمد | رد

    البيانات الشخصية
    الاســــــــــــــــــــــــــــــــــــم : إبراهيم حسين محمد محمدين
    تاريخ الميـــــــــــــــــــــلاد : 22/3/1988
    الحالة الإجتماعية : أعزب
    الإيــــــــــــــــــــــــــــميـل : engibrahim2009@yahoo.com
    الشهـادات الجامعيـة
    الشهادة الجامعية : بكالوريوس الهندسة الكهربية – شعبة قوي والات
    جامعة أسيوط 2009 بتقدير عام جـــيد
    الخبـــرات العمليـة
    العمل الحالي : من يناير 2012 حتي مارس 2014
    مهندس كهرباء تصميم و تنفيذ بمؤسسة الزيمي للمقاولات العامة والطرق بمكة المكرمة.
    العمل السابق : من يناير 2011 حتي ديسمبر 2011
    مهندس كهرباء تصميم تنفيذ بالشركة المتحدة للتوريدات الكهربائية والمقاولات العمومية
    من اكتوبر 2009 حتي نوفمبر 2010
    مهندس صيانة وتحكم بالمصنع الحديث لتحويل وطباعة الورق .
    الدورات والتدريبات الخارجية
     دورة PLC من الشركة اليابانية بالقاهرة
     التدريب بمصانع شركة السكر للصناعات التكاملية
     دورة ICDL
    المهــــارت الشخصية واللغات
     إجادة اللغة الانجليزية
     إجادة إستخدام الكمبيوتر والبرامج الهندسية ( أوتوكاد – دايالكس – ايكوديال- أوفيس )

    إعجاب

  7. Dear Sir,

    I hope join your team to rich my experience and raise company value.

    Regards

    Abdelreheem Mohamed Deghedy
    Senior Mechanical/Industrial BIM Engineer

    Full Name: ABDELREHEEM MOHAMED ABDELREHEEM DGHEDE
    Home Address: Elnarges Buildings – New Cairo – 5th settlement – Egypt
    Date of birth: September 12 / 1984
    Email: Amdghedy@gmail.com(amdghedy@hotmail.com)
    Mobil: 002 01001877018 (00201020405559)
    Nationality: Egyptian
    Marital Status: Married-1 children
    Militarism status: Exempted

    OBJECTIVE

     Seeking a challenging position as a BIM MEP Team Leader Engineer with an organization that has the vision and potentials for development, growth and expansion and at the same time maintain a high standard of performance and business ethics.

    SUMMARY

     Extensive construction experience, designing, coordinating, modeling, visualizing and animating a wide range facility/building types(health care, cultural, education, hotels, residential, office and religious buildings)
     Proficient with multiple BIM systems and platforms for integrating the design, means and methods of construction
     Passionate creating custom application and Bentley contents, expertise in developing Bentley families at complex nested levels with formula based approach, unify the BIM standards and produce 2D & 3D site safety construction logistics, virtualization studies, model cost estimating, life cycle, maintenance scheduling and facilities management, all from one time entry with a friendly interface.
     Natural aptitude for fast learning the latest software to ensure a top quality product, both now and in the future.

    EDUCATION AND QUALIFICATION

     B.Sc. from Alexandria university faculty of engineering naval architecture and marine engineering part of MECHANICAL ENGINEER with total grade Good and Distinction in project which is HOVERCRAFT DESIGN 2002-2007

    TRAINING COURSE ATTENDED

     HVAC design theoretical course from Engineering Syndicate.
     Water Network design theoretical course from Engineering Syndicate.
     Firefighting design theoretical course from Engineering Syndicate.
     ICDL Course from Russian Culture Center
     Construction Planning and Scheduling (PM250) Course in CCC Seminar’s Programs with DR. Manar Elshami.
     Alexandria shipyard for maintain and building ships summer training.
     Kom-Hamada factory for textile summer training.
     Preparing PMP 5th edition Exam.

    WORKING HISTORY

     Aug. 2013-Until now.
    Working in Consolidated Contracting International Company (CCIC) in Building Information Modeling Department (BIM) as SENIOR BIM MEP ENGINEER Lead mechanical modeling team, manage work, putting time schedule, give assumption, read all drawing, details, risers, specification, BOQ, and extract take off report from coordinated model by using (Bentley micro station mechanical solution) program for (valves no. pipes length for all discipline, calculate duct per KG, find total length for cable tray, find insulation per meter square for duct and per linear meter for pipes, total no. equipment……etc.)

    Project Name: OPERA HOUSE PROJECT IN DUBAI (OHDD)

    Description: A multibillion-dirham opera house in Downtown Dubai beside Burj Khalifa will be built using technology that allows the 2,000-seat theatre to be converted into a banqueting hall or exhibition space, the designers say.
    Designed by: Zaha Hadid,
    Lead Consultant: WS Atkins & partners overseas
    Owner: EMAAR
    Develop Manager: Mirage

    Project Name: Abu Dhabi Plaza Project in Astana (ADP)

    Scope of work: Abu Dhabi Plaza is a mixed use development project which is comprising a gross floor area of some 500,000 m2 located near president center Astana. The project will comprise a retail podium, integrated plaza, residential apartments, international grade office, accommodation and hotel quarter. The proposed height rise commercial tower is expected to become an iconic building on the Astana skyline, with a Class A+ office tower and 5 star hotel, and service apartments to either side. Abu Dhabi Plaza Project will be one of the highest buildings in the world.
    Total Budget: 800 Million USD,
    Clint: Aldar Properties,
    Project Management: Mott McDonald,
    Consultant: HKR Architecture

    Project Name: Abu Dhabi Court House (ADCH)

    Description: Complex building with interior works B+G+ 8 floors-judge rooms, admire building, judgment court, temp and jail.
    Total Budget: 218 Million USD
    Client: Abu Dhabi Judiciary Department.
    Project Manager/consulting: Morganti Group Inc/Dar Omran.

     Aug. 2011-July 2013
    Working in Consolidated Contracting International Company (CCIC) in Building Information Modeling Department (BIM) MEP Coordinator in QFIS project in Qatar to make modeling and coordination for Plumbing, Sewage, HVAC, Gas and Fire Fighting Systems and find out the total length for pipes, total amount of peace for fittings, weight of duct in KG And find out the BOQ for the project for make estimation for this project.

    Project Name: Qatar faculty of Islamic study project (QFISP)

    Description: the work is mainly the construction of a faculty for the Islamic studies. The premises of Qatar educational city The complex design of the faculty includes a huge prayer hall, Auditorium, Classrooms, Lecture halls, two 90m high minarets with the

    Total Budget: 230 Million USD
    Total gross floor area 28,000 sq. m
    Design Architect: MYAA
    Executive Architect: RHWL
    Design MEP: ARUP
    Owner: Qatar Foundation
    Project Management: ASTAD
    Main Contractor: Consolidated: Contractors Company

     May.2010-Aug. 2011
    Working in Consolidated Contracting International Company (CCIC) in Building Information Modelling Department (BIM) as BIM MEP ENGINEER to make modeling and coordination for Plumbing, Sewage, HVAC, Gas and Fire Fighting Systems and find out the total length for pipes, total amount of peace for fittings, weight of duct in KG And find out the BOQ for the project for make estimation for this project working in various type of projects like

    Project Name: Nile Cornish Hotel project (NCP)

    Description: The Nile Cornice project is one of a number of significant Qatari Diyar projects in Egypt. Located on the banks of Nile River in Cairo, The St. Regis Hotel marks the ultimate expression of contemporary luxury in Egypt’s thriving capital city and will be an important component of a high-rise hospitality and residential complex.
    Total Budget: 1 Billion USD
    Total gross floor area 197,227 sq. m
    Owner: QATARI DIAR

    Project Name: F-Ring Road Expressway (FRP)

    Scope of work: The F-Ring Road is part of the Expressway Programmed and is a new road between Al Muntazah Street and Al Matar Street providing access to the new Doha International Airport and a direct link to the south side of Doha. The project includes the construction of a new 8.7 km expressway comprising of six to eight lanes (three to four in each direction) divided by a median with ramps and service roads at the Intersections. There are two interchanges; Al Matar Street and Najma Street Extension with bridges to be constructed. Local traffic movement is catered through two-lane frontage roads adjacent to the main carriageway.

     Aug.2008-Apr.2010
    Working in Archie-Time technical office for marine design as BIM project engineer, detailed Design drawings and modeling outfitting and piping:
    Using FORAN package software (FPIPE, FMODEL, GHOST, DEFINE, DRAW)
    Piping systems routing and studying in cad drawing, Reading of schematic diagrams, modeling, equipment, Material defining, Isometric drawings, Disposition drawings for mountings with details. HVAC ducts and cable trays modeling and disposition drawing, Foundations for equipment modeling & drawings, Material list report

    Nov. 2007-Jul.2008.
    Working in ocean classic for Yacht, as quality control, checks all hull building all stages, laying pipes, checks all welding parts for quality and many of other things that concern with ship building.

    TECHNICAL PROFICIENCY

     Software Professional in – Bentley Building Mechanical Systems V8i.
     Software Professional in – FORAN package produced by SENEER.(3D marine mechanical field)
     Software Professional in – Revit MEP 2014 produced by Autodesk
     Software Professional in – AVEVA PDMS (Planet Design Management System) package.
     Software Professional in – AutoCAD 2007 & 2010, ZWCad 2012
     Software Professional in – Faro Scene Package (3DSurvey program)
     Software Professional in – Geomagic Package (3DSurvey program)
     Knowledge about internet operation.
     Software Professional in -AECOsim Energy Simulator V8i
     Software Professional in –Hourly Analysis Program HAP.Carrier Product
     Professional Use Operating System : Windows 9x / 2000 / XP /Vista/Windows 7/ Windows 8
     Strong Knowledge about Computer headwear, softwear & Computer Trouble Shooting. (Formatting)
     Professional in Software’s – MS Word, Excel, PowerPoint, Outlook, Visual Byblos Cyberspace (VBC), Etc.

    OTHER SKILLS AND ADDITIONAL INFORMATION

     Good user for various standards like (ASTM,ANSI,API, DIN)
     Theoretical training course in drilling wills and oil extraction by all various methods (on land & at sea).
     Take ICDL in Russian center in Cairo.
     Good in speaking and listening English, (French, Spanish) is fair, Arabic is mother Tung.
     Social peaceful and honest in work.
     I have good problem solving skills.
     Ambitious and determination.
     Adapts to changes and Deal effectively with conflicts.
     Reliable and responsible work ethic.
     Able to learn new soft wear quickly.

    إعجاب

  8. Islam Mohamed Abdel Fattah
    E-mail: islam_engineer91@yahoo.com
    Website: http://www.way2allah.com
    Phone: 01156567899
    01067989990
    Address: Begam
    Shoubra El-Kheima
    Kalyoubya

    Objective
    Structural engineer with experience in technical office and construction works,want to work a designer engineer and not refuse to work in any branch of civil engineering.
    Education & Courses
    Civil Engineering 2009 — 2014
    Helwan University
    • Overall estimate of Very good.
    • Structure graduation project with full details of reinforcement and desingn structural elements.
    • Optional Courses:
    1. Prestressed concrete
    2. Special R.C structures (Shells,Folded plates and Bridges)
    3. Earthquake engineering
    ICDL
    Faculty of Engineering at Helwan
    AutoCAD
    Resala trainning Center RTC
    Revit Structure
    Resala trainning Center RTC
    Sap2000
    Resala trainning Center RTC
    Etabs
    Resala trainning Center RTC
    Primavera
    Resala trainning Center RTC
    3D Max
    Resala trainning Center RTC
    Six hats
    Resala trainning Center RTC
    Work experience
    Dr.Alaa El-Sheiref Office
    Trainning
    Arab constractors Jul.2012 — Aug.2012
    Trainning
    Acec for trading and constracting 1 Sep.2012 — 15 Sep.2012
    Trainning
    Acec for trading and constracting 9 Feb.2013 — 23 Feb.2013
    Trainning
    Detac for and constracting 8 Jun.2013 — 22 Jun.2013
    Trainning
    Arab constractors 7 Jul.2013 — 28 Jul.2013
    Trainning
    Nile Company for Roads and Bridges 1 day
    Trainning
    Ministry of Irrigation 1 day
    Trainning
    Skills
    • Good experience using computer and network
    • Good ability to lead a team work
    • Good English
    • Rapid ability to learn
    • Motivated my team in many hard times
    • Participated in presentations and projects with teams and independently
    • Good presuasion and discussion with people
    • Judo player in the club of the federation of police sports
    • Captain of school football El-Sahel youth center in 2004
    • Good painter
    Interests
    • Studding engineering sciences and religious sciences.
    • Computer and network courses.
    • Achieving more experience.
    • Playing sports like: Judo and football.

    إعجاب

  9. CURRICULUM VITAE

      Name:  NABIL RAGAB FAHEEM.
      Date of Birth:  01 Jan, 1975.                    
      Nationality: Egyptian.
      Tele. :  0097477025661  ,  ,0020483310654 
      Work. : AUTOCAD & REVIT DRAFTSMAN ELECTRICAL
      Email:  nabil_ragab_2004@yahoo.com
                  nabilragab@gmail.om
    

    CAREER OBJECTIVES

    My prime objective is to attain a challenging position in AutoCAD &Revit Draftsman and desire to work in a competitive environment in achieving organizational and personal goals. Hoping to gain experience as much as possible, with good financial conditions.

    WORKING EXPERIENCE

    QATAR
    RAMCO TRADING & CONTRACTING W.L.L(Since Dec.2008 till NOW)

    Main tasks:

    • Preparing Shop drawing for all Electrical system (Power, Lighting and .Low current system. Telelphone. data .fire alarm .cctv .sound system). Using Autocad 2014 and REVIT 2014.
    • prepared detailed Autocad Drawing Of Building Design For Architectural, Commercial And Light Industrial Buildings.
    • Checked the Project’s Drawings and Coordinated between Havc System, Fire Fighiting System And Electrical System.
    • Created Wiring Diagrams And Connection Diagrams
    • Developed and propared final production drawing and fabrication specifications for the shop floor from the design drawing and models.
    • Revised engineering drawing for missing structural or design elements.
    • Completed documentation packages and produced drawing sets.
    • Assisting to prepare BOQ and building measurements.
    • Bim coordinator
    – Electrical works Shopdrawing for Projects:

    1. Mesheireb Bulding 1 ( G+B+9 Floor)
    2. Mesheireb Bulding 2 ( G+B+10 Floor)
    3. Private Palace Complex For Sehka Hessa Al Thani (5 Bulding)
    4. AKH Tower In Aldafna Location (2 BASEMANT+G+38 Floor)
    5. Proposed (G+1) Labour Accom., Mosquem,Guard Room & Playground At Al-Wakrah
    6. Alghanim Appartment (9 Building, 2 Basemant +7th Floor)
    7. Proposed Commercial Bank Academy ((2Basemant +G+M+2 Floor)
    8. Mezna Rashid A Al-Naemi Project (B+G+M+1st Building)
      In Ain Khaled

    As built drawing for Projects:

    1. MINISTRY OF FINANCE BUILDIN G & CARPARK
    2. Meshereb Bulding 1
    3. Meshereb Bulding 2
    4. School-6 In Bani Hajer Secondry Boys
    5. School-12 In UMM SALAL
    6. School-13 In Al Nassiriyah West
    7. School-15 In Al Nassiriyah West
    8. School-16 In Al Nassiriyah West
    9. School-17 In Bani Hajer
    10. School-18 In Bani Hajer Secondry GIRLS
    11. AKH Tower In Aldafna Location (2b+G+38 Floor)
    12. El merqab el Gadeed (commerial and resdential building )
    13. Alghanim Appartment (9 Building, 2 Basemant +7th Floor)

    EGYPT

    1- Madkour Group (MG), (Since Mar.2005 till Dec.2008) System Projects

    • Work Contribution:

    A- Electrical works Shopdrawing for Projects:
    1. Nubaria Power Station I & II .
    2. Nubaria Power Station I & II .
    3. Talkha Power Station.
    4. Cairo North Power Station.
    5. For seasons Nile Plaza hotel

    EDUCATIONAL QUALIFICATION

              University :  AL Minufia University- Egypt.                                
              Course      :  Bachelor of Arts..
              Grade year :  May, 1997 (good).   
    

    SKILLS
    – Operating Systems (WIN 7, WIN 8)
    – Draft of engineering drawings using AutoCAD 2014 and Autodesk Revit 2014
    – Microsoft Office Package (Word, Excel, Power Point…etc)
    -Autodesk Revit 2014
    -Autodesk Navisworks 2014
    – Adobe Photoshop.

    Language skills:

       Arabic: Native Language
       English: Good: Speak, Read, Write
    

    THANK YOU
    NABIL RAGAB

    إعجاب

  10. Personal Information
    • Name : Abdul-Rahman Ahmed Sami Badawy
    • Gender : Male
    • Date of Birth : March 9, 1980
    • Nationality : Egyptian
    • Marital Status : Married
    • Driving license : Egyptian driving license & Saudi driving license
    • Address : 8 Al Henaidy St. Madkoor – EL-Ahram -Giza –Egypt
    • Tel. No. : Mobil 0020-125943238 & 00966-505600760
    • E-mail : Ra7mona_463@hotmail.com

    Qualifications
    • B.SC. of Civil Engineering , Higher Technological Institute at 10th of Ramadan City ( 2004 )
    Grade : Good (C+)
    Project : Structural analysis with a grade very good (B+)

    Languages
    • Arabic : Mother tongue
    • English : Good read and writing

    Computer Skills
    • Drawing Programs : AutoCAD 14 , 2000 , ….. ,2013, and all revisions
    Revit 2011,…, 2013
    • Analysis Programs : SAP 2000 ,
    Staad 2.11 ,
    & some small design programs
    • MS office : Familiar with its applications (word, Excel, outlook ,etc )

    Memberships
    * Egyptian Syndicate of Engineers
    * Egyptian engineers association in Riyadh
    * Saudi council of engineers

    Courses
    * Maintenance and repair the concrete building.
    * different type of shuttering and formwork (wood, Steel and PVC)
    * ACI concrete construction special inspector
    * ACI field test and laboratory tests of concrete
    * Advanced Revit course
    * Advanced Auto CAD structural details (ASD) course

    Experience
    * From June.2008 up till now, working in Saudi Arabia at (SBG) Saudi Binladen Group as a technical office engineer specially for preparing and checking the shop drawing of the below projects and also improving the skills level of several teams of draughtsman and engineers in Autodesk programs.
    1. Increasing Mataf capacity in Makkah (Holy Mosque)
    2. (KAFD) King Abdullah Financial District in Riyadh (1400 million)
    3. Shemesy project in Makkah
    4. (KSU) King Saud University In Riyadh
    5. Tabuk air port
    6. Bay la san towers in Rabig
    * From March.2007 up March.2008, working in Saudi Arabia at Al-Majal Al-Araby group. as a project manager engineer for a small project for maintenance of hospital in Jeddah (6 million).
    * From July.2006 till March.2007 , working in Egypt at Medcom construction company as a technical office engineer for a below factories building
    1. Sector factory for spinning and textile in Alexandria (13 million)
    2. Juhinah factory for milk productions in 6th of October City (17 million).
    * From 0ctober.2004 till July.2006 , working in Egypt at Dream Home construction company as a site engineer for build residential buildings ( 0.8) million for each

    إعجاب

  11. Mahmoud Ahmed Khattab
    (Surveyor)
    Mob: +00201012167159
    00966535245419
    Email: mahmuodkattab46@yahoo.com

    Career Objective:

    To obtain challenging position in a progressive organization, where I can share & enhance my professional skills and experience for the betterment of the company.

    Education:

    Graduation: Survey Institute Cairo, Egypt – Jan 2001

    Computer Literacy:

    o Ms Office (Word, Excel, Power point, Etc.)
    o Auto CAD
    o LAND DESK TOP
    o Server 7 Program – Excellent
    o Sokia Link Program – Excellent
    o ProLink Program – Excellent
    o Sokia Total Station 330RK, 610-510, Etc. Devices – Excellent
    o LeicaTotal Station TCR1203+
    o Trample Total Station Device – Excellent
    o Google Mappek to install the drawing on Google earth

    WORK EXPERIENCE:

    2012- Till now : Industrial Gate City of 6500000 m2 area included infra structure work of sewer, storm, irrigation lines and electrical power networks working in a technical department.

    2010-2012 : Villa Project 1000 with the establishment of sewer lines and

    irrigation lines, power lines and roads in the Kingdom of Saudi Arabia

         2008- 2010     : Beijing Emirates International Building Contracting. Dubai
    

    Project: Hospital G + 2, 100 Beds. Tawars

          2006-2008     : Samsung LLC. –Egypt
    

    Project: American University – Cairo

    2004-2006       : Arab Contracting Co.  - Egypt
    

    Project: Sewage Treatment – Al Bahaira

    2002-2004       : Morai LLC.- Alexandria, Egypt
    

    Project: San – Stifano

    2001-2002       : Ministry of Irrigation - Egypt
                                 Project:  Irrigation Development 
    

    Responsibilities as a Surveyor:

    • Setting out of Axis, Columns and Ceiling.
    • Make levels for Ceiling, Columns and Walls Etc.
    • Transfer Data from AutoCAD to Total Station.
    • To make layout of Internal & External walls.
    • To make Offsets on Wall for Plaster.
    • Setting out for Landscaping, Road, Etc.

    SKILLS & ACHIEVEMENTS

    • Able to lead a Team of Surveyors.
    • Calculate the quantity for Excavation & Filling.
    • Calculation / Planning for Lineation & Delimitation.
    • Submit the shop drawing and the RFI requests for the work with the consultant

    Personal information

    Nationality : Egyptian
    Marital Status : Married
    Date of Birth : Feb 8th, 1982
    Languages Known : Arabic, English (Working Knowledge)

    (MAHMOUD AHMED KHATTAB)

    إعجاب

    1. يارب فرصه كويسه

      إعجاب

  12. رسام معماري | رد

    الاســــــــــم : إسماعيل صبحي إسماعيل حباجة
    العنــــــوان : جمهورية مصر العربية- محافظة البحيرة- مركز شبراخيت- قرية: محلة صا.
    رقم الجوال : 01117138399

    البريد الإليكتروني : esmhabaga@yahoo.com

    الخبرات العلمية
    • تكنولوجيا المعلومات من وزارة القوى العاملة المصرية.
    • إجادة التعامل مع برنامج Offic ، والحاسب، والإنترنت.
    • الرسم المعماري على برنامج AutoCad .
    • الرسم على برنامج Revit Architectural .

    الحالة الاجتماعية:
    متزوج: نعم.
    عدد الأولاد: بنتان.
    السن: 32 سنة.

    إعجاب

  13. Personal Data
    Name : Mohamed Gaber Ali Gomaa.
    Date of birth : 22\8\1981.
    Place of birth : Ismailia ,st banha
    Nationality : Egyptian.
    Religion : Muslim.
    Marital Status : Married.

    Contact Data

    Address : Cairo . Ismailia ,st banha
    Mobile : 01203285545
    E-m@il : mgaber.it@hotmail.com

    Education Data
    Certificate B.S. Degree in Faculty of computer.
    Branch Computer Sciences.
    Grade Good.
    Graduation Year 2003.

    Languages Skills
    Arabic Mother Tongue.
    English V.Good

    Owns a Saudi driving license

    Job Experience

    Place of work Details of the work
    Governorate Ismailia IN Egypt systems analyst
    Saudi educational institution June 2010 – July 2012
    IBM – Ismailia Branch. INSTRACTUR
    Grant advanced in area of computer networks (xp professional , server 2003 , Infrastructure , sql administration )

    International regulations modern IT Admin
    April 2003 – April 2007

    chateau IT
    June 2002 – July 2003

    Certificates & Courses

       ITI                         Instructor Programming 
    IDSC                     DevInfo V,6 Administration
    
                          ( MCSA ) Microsoft Certified System
                                                    Administrator   
    

    ( MCP ) Microsoft Certified Professional.

            ( MCTS ) Microsoft Certified Technology
                                                   Specialist
    
    
    
                                 ( MCITP 2008 Enterprise) Microsoft Certified 
                                                   IT Professional
    
                                 (CCNA  Routing & Switching) Cisco certified                           network associated
    

    Computer Skills

    • Experience in writing reports and open practice committees, auctions and tenders from a technical point
    • Provides support for clients’ Microsoft Windows 2008,2003 servers and Vista,7,xp workstations
    • Managed user accounts using Active Directory
    • Implemented TCP/IP and related services, such as DHCP, DNS, and WINS
    • Installed, maintained, and repaired network-based printers, copiers, and scanners
    • Maintained system backups, software updates and current anti-virus software definitions
    • Installing and configuring LAN
    • Implementing basic network topologies using media connectors and cabling
    • Design, calculate, and apply subnet masks-
    • Explain basic switching concepts and the operation and configuration of Cisco switches
    • Describe enhanced switching technologies such as VLANS, VLAN Trunking
    • Protocol (VTP), Rapid Spanning Tree Protocol (RSTP), Per VLAN Spanning Tree Protocol (PVSTP) and 802.1q
    • Configure, verify, and troubleshoot VLANs, trunking on Cisco switches, inter VLAN routing, VTP, and RSTP
    • Identify, prescribe, and resolve common switched network media issues, configuration issues, autonegotiation, and switch hardware failures
    • Identify and describe the purpose of the components in a small wireless network, such as service set identification (SSID), basic service set (BSS), and extended service set (ESS)
    • Describe the purpose, nature and operations of a router
    • and routing tables
    • Describe, configure and certify router interfaces
    • Explain the purpose and procedure for configuring static routes
    • Identify the characteristics of distance vector routing protocols
    • Describe the network discovery process of distance vector routing protocols using routing information protocol (RI P)
    • Describe the functions, characteristics, and operations of the RIPv1 protocol
    • Compare and contrast classful and classless I P addressing
    • Describe classful and classless routing behaviors in routed networks
    • Design and implement a classless I P addressing scheme for a given network
    • Demonstrate comprehensive RIPv1 configuration skills
    • Describe the main features and operations of the enhanced interior Gateway routing protocol (EIGRP)
    • Describe the basic features and concepts of link-state routing protocol
    • Describe the purpose, nature and operations of the open shortest path first (OSPF) protocol
    • Configure and verify basic wan serial connections including serial, point-to-point and frame relay
    • Describe the functions of common security appliances and applications and the practices to secure network devices
    • Describe, configure, apply, monitor, and troubleshot access control lists based on network requirements
    • Describe the importance, benefits, role, impact, and components of VPN technology
    • Explain, configure, verify, and troubleshoot IP addressing services including network address translation (NAT) ,DHCP, and DNS

    إعجاب

  14. عبدالمؤمن ناظك حامد | رد

    Name: Abdel Moamen Hamed Ragab
    Address: 22 Aleman St. Almontaza Alex
    Home: +20 9607542
    Mobile: +20122 6368023 / +201007994919
    E-mail: Momen_alex37@yahoo.com
    PERSONAL INFORMATION
    • Date of Birth: 01/01/1987.
    • Nationality: Egyptian.
    • Place of Birth: Cairo, Egypt.
    • Gender: Male..
    • Marital Status: Married
    EDUCATION
    BS Industrial Education Helwan University
     College: Industrial Education.
     Division: Technology electronics
     Graduation Date: May 2008
    WORK EXPERIENCE
    • April 2013 till Now–
    Company: American International Contractors Inc. (Archirodon).
    Project: Syncrolift Safety Repairs.
    Location: Ras El Tin Naval Base Alexandria, Egypt.
    Project Owner: US Army Corps of Engineers Middle East District.
    Title: Draftsman & Output details
    * Duties:
    • Create & Prepare Shop Drawings For:
    A. Civil: (Concrete Steel Reinforcement, CMU, Finishing, Floor)
    Average Daily Output Drawings For Concrete Steel Reinforcement 3 Sheets
    B. Electrical: Power & Lighting (Under Supervision of the Electrical Engineer)
    • Coordinate Between All Project Drawing Aspects
    • Capable Of Preparing Logs, As Requested
    • Double Check Shop Drawing For My Colleagues
    • Preparing As Built Drawing For Surveying Work
    2
    • June 2011 till March 2013–
    Company: Hassan Allam Construction.
    Project: Alexandria sugar .
    Location: Cairo Alexandria Desert Road.
    Project Owner: Alexandria sugar Co.
    Title: Draftsman & Output details
    * Duties:
    • Create & Prepare Shop Drawings For:
    Civil: (Concrete Steel Reinforcement, CMU, Finishing, Floor, Facade
    & Coordinate Between Concrete Foundation and Steel Structural)
    Average Daily Output Drawings For Concrete Steel Reinforcement 4 Sheets
    • Coordinate Between All Project Drawing Aspects
    • Capable Of Preparing Logs As Requested
    • Double Check Shop Drawing For My Colleagues
    • Preparing As Built Drawing for Surveying Work
    • Quantity Surveying For Concrete Work and Bar Bending List
    • October 2010 till May 2011–
    Company: Orscom Construction.
    Project: Ezz Steel Flat.
    Location: Ain Sukhna.
    Project Owner: Ezz Steel Co.
    Responsibilities / Title: Draftsman & Output details
    * Duties:
    • Create & Prepare Shop Drawings Civil: (Concrete Steel Reinforcement)
    Average Daily Output Drawings For Concrete Steel Reinforcement 1 Sheets
    • Coordinate between All Project Drawing Aspects
    • Double Check Shop Drawing For My Colleagues
    SKILLS
    • Computer Skills:
    • Professional of: 1- Auto Cad 2D
    2- Microsoft Office, Internet & All Windows Revisions
    • Aware: 1- Auto Cad 3D
    2- Tekla Structures (14.0&16.0) Europe (Steel Structural Drawing)
    • Language Skills:
    *Arabic: Mother Tongue.
    *English: good command (both written and spoken).
    COURSES
    * Arab Academy for Science and Technology Auto cad 2 D.
    * Arab Academy for Science and Technology Maintenance #1
    * ICDL “International Computer Driving Licence“ For Windows – word – Excel – PowerPoint-Internet
    Helwan University
    REFERENCES ARE AVAILABLE UPON REQUEST
    THANKS FOR YOUR ATTENTION

    إعجاب

  15. Nesreen Salloum
    2014
    Gender: Female
    Nationality: Syrian
    DOB : Damascus – July 13 .1984
    Marital Status: Single
    Mobile: +963- 940678394
    Address: Syria -Damascus – Zahira Jadida
    Email: nara.n84.ns@gmail.com
    LinkedIn: http://www.linkedin.com/pub/nesreen-salloum/43/aa3/b55/

    OBJECTIVES
    

    Communicating, learning, exchanging ideas and experiences in order to handle my duties in a professional manner to create positive change in my position, organization, and community.
    To express myself and to get the best out of my education.
    EDUCATION
    Engineering Intermediate Institute Degree – Damascus University
    From: 2002 To: 2004

    MAJOR EXPERIENCES:
    Customer Services: 4 Years
    Estimation: 5 Years
    Material Order : 5 Years
    Shop Drawing: 5 Years
    Fabrication Order: 5 Years

    SPECIALTIES :
    – Schuco Systems
    – Technal Systems

    EXPERIENCE
    Designer & Administrative officer| Art Ware Architecture
    From: 14-11-2013 – To: Now
    Senior Designer| SAMA MADAR Aluminum Fabrication Division
    From: 10-10-2012 – To: 31-5-2013
    1. Studying Projects contains:
    a. Prepare quotation & send it to the customer
    b. Prepare shop Drawings using AutoCAD program
    c. Prepare Materials & fabrication orders
    2. Discussing the tasks with the work team
    3. Present Daily & weekly reports to the Administration
    4. prepare schedules for the tasks required by the Department
    5 archiving all the work as Hard & Soft copy
    1. Training the stuff on LOGIKAL Program.
    2. Programming LOGIKAL data.
    3. Practical Lectures (Workshops for all depts.) for SCHUCO systems Estimation & Fabrication )

    Project Designer | SAMA MADAR Aluminum Fabrication Division
    From: 01-11-2008 – To: 10-10-2012
    1. Studying Projects contains:
    a. Prepare quotation & send it to the customer
    b. Prepare shop Drawings using AutoCAD program
    c. Prepare Materials & fabrication orders
    2. Discussing the tasks with the work team
    3. Present Daily & weekly reports to the Administration
    4. Prepare schedules for the tasks required by the Department
    5. archiving all the work as Hard & Soft copy
    6. Training the stuff on LOGIKAL Program.
    7. Programming LOGIKAL data.
    8. Practical Lectures (Workshops for all depts.) for SCHUCO systems Estimation & Fabrication )

    VICE MANAGER OF THE STUDIES DEPARTMENT| SAMA MADAR Aluminum Fabrication Division
    From: 16-04-2009 – To: 10-07-2009
    1. Prepare work plan of the department
    2. cooperating with the other departments
    3. present reports includes the departments work to the administration

    Projects Manager Assistant: | SAMA MADAR Aluminum Fabrication Division
    From: 14-07-2007 – To: 30-10-2008
    1. arrange the files of the customers and archive them hard & soft copy
    2. Prepare the required forms like:
    -Measurement requests
    -Employees’ Tasks application
    – follow-up projects Tables.
    3. Prepare the Quotation & fabrication order upon the request of the Projects manager.
    4. customer service duties: meeting the customers & answering their questions (during the estimation stage & the fabricating stage)
    5- Prepare work Reports as the following:
    -weekly detailed reports contain the current status of the projects
    -daily detailed reports contain Projects Department’s work
    6- prepare projects’ invoices (partial & final) and send them to the customers.

    Studies Department Manager | Al-Mouayad Aluminum
    From: 1-01-2006 – To:29-05-2007
    PROJECT HIGHLIGHTS AS(Project Designer& Project Manager)
    Jasmine SPA & Helth CLUP (2009)
    GIMINI CLUP (2009)
    GORDOBA HILLS (2009 .. 2010)
    ALMARTEENEE HOTEL (2009 ..2010)
    Val d’Hydra, Alger, Algeria Project (2009 ..2011)
    BASHAR GALLI Privet Villa (2009 ..2010)
    Granada Hotel (2011—2012)
    Orfan Lababidi project ( 2011- Till Now )

    PROJECT HIGHLIGHTS AS(Estimator)
    The Address Project (2011 )
    SAMA CITY (ALLEPO ) Project (2011)
    RAOUCHE BEIRUT – LEBANON (2012)
    TRUST REAL ESTATE – TRUST COMPLEX BUILDINGS / BAB EZZOUAR – ALGERIA (2012 )
    SKILLS
     Personal Skills:
    • Ability to work under Pressure.
    • Self Motivated and Dynamic.
    • Ability to work with Team.
     PC Skills:
    • AutoCAD
    • Google Sketch up.
    • Internet & Outlook Express
    • Microsoft Office ( Word – Excel – Power Point )
    • Some other programs related to my jobs
    LANGUAGE
     Arabic: Native.
     English: Good (Understanding, Speaking, & Writing).
    TRAINING
    • Al-Rowad Institute :
    o English course (2007).
    • The Training Center of The Damascus Chamber of Commerce:
    o Problem Solving & Crisis Management Course (2007)

    • Sama company DIG Group:
    o Great Plains Program Course (2007 )
    o Logikal Data Program Course (2007 )
    o SCHUCO SYSTEM-1- (Technical information) (Syria 2010)
    o SCHUCO SYSTEM-2- (Technical information , Estimation) (Dubai 2010)
    o SCHUCO SYSTEM-3- (Technical training) (Syria 2010)
    o Documentary credit Course (2010 )
    INTERESTS & ACTIVITIES
    • Computer, web sites browsing
    • Book Reading
    • Archiving & scheduling
    References and recommendation letters are available upon request.

    إعجاب

  16. Name: Ahmad Al Srei

    PERSONAL INFORMATION
    Place & Date of Birth : AL- Salt / Jordan 11 / 02 / 1989
    Gender & Marital Status : Male, Single
    Nationality : Palestinian Authority

    EDUCATION
    Beirut Arab University, Mechanical eng. Dept Debbieh, Lebanon
    Bachelor in Mechanical eng. (GPA 3.41) 2008-2013
    Coursework includes:
    – Pipe line
    – Hydraulic equipment
    – HVAC

    Al Aqsa secondary school, LS Tyre, Lebanon
    Lebanese Baccalaureate in Life Science, 2005-2008

    EXPERIENCE
    Hassanein Co (Generator set and accessories) Ghazieh, Lebanon
    Internship 1/Jan2014-6/mar 2014
    -EMZ Punching press machine 2D CAD/CAM software
    -Training on how silencer are assembled
    -Testing of generator set and reporting

    Al Hady Company Tyre, Lebanon
    Internship Sept2013-Nov 2013
     Inspection and Maintenance of diesel generator set.

    SEM “aka Seraj Electromechanical” Beirut, Lebanon
    Internship July 2012-August 2012
     Site and office training that led to interact with workers and supplier
     Complete as built drawing that improve my skills in AutoCAD

    Anhar for swimming pools and water filtration Tyre, Lebanon
    Internship August 2012-Sept 2012
    -Site work “Pipes connection, Pump test and filters activating”

    Sanitary works in houses with my uncle all over the year.
    SKILLS

    Languages: Arabic (native); English (fluent).
    Computer Skills: AutoCAD 2D&3D (shop drawing and as built drawing)
    Mechanical Desktop (mechanical drawing)
    EES (engineering equation solver)
    HAP (used for refrigeration)
    Automation Studio (Hydraulic equipment)
    HTRI (Heat exchanger)
    Pipe Flow Expert (used for reservoirs and pipes calculations)
    Microsoft office (Word, Excel, Access, PowerPoint)
    Final year project: Design and testing of an absorption air conditioning driven by exhaust gases of vehicle.

    AWARDS:
    -Third place in the ASME rapid design challenge, ASME, April 2011
    -University scholarship – UNERWA 2008-2013
    -Best goal keeper in Tyre, Tyre Municipality, 2008

    PROFESSIONAL DEVELOPMENT:
    -Student professional development Conference “SPDC”, ASME, 28-30 April 2011
    -Leadership training, Rahma, July 2009 (3 days)

    HOBBIES:
    -Football “goalkeeper”
    -Swimming

    REFERENCES:
    Ali Khalaf “mechanical engineer at SEM” (+961) 71282696
    Nourelden Issa “mechanical engineer at Hassanein CO” (+961)70314130
    Kamel Suleiman “Supervisor at Al Hady Company” (+961) 70392484

    إعجاب

  17. Abdelrahman Saleh Elsayed | رد

    Mobile: +2 01000889116
    Email: eng_abdo101@yahoo.com
    Date of Birth: 29/9/1990
    Address1 : tala , Menoufia
    Career Objective
    Seeking a challenging position where I can demonstrate my skills, to take use of all my capabilities, experiences and engineering study, to improve my self-being through the company’s success and gain more knowledge in Civil Engineering Department.
    Education
    ■ Menoufia University – Faculty of Engineering
     Bachelor of civil engineering 2012

    Skills
    ■ Courses
     AutoCAD 2D.
     Sap2000

    ■ Languages:
     Full command of Arabic, spoken and written (Mother Tongue).
     Full command of English, spoken and written.
    Experience
     Civil Site Engineer in EL-Eman contracting company since 1 april 2014

    Personal qualifications
     Strong Business Procedures experience.
     Logical thinking and attention to details.
     Ambitious, flexible, fast learning and hard worker.
     Ability to work under pressure and meet deadlines.
     Excellent Managerial, analytical and problem-solving skills.
     Motivation to learn new technologies and to achieve progress.
     Excellent in Communicating, Time Management Skills & Writing skills.
     Leadership, Teamwork capability and responsibility shouldering capabilities.
    Summer Training

     Training in Irrigation company ( Shebin El-Kom ) 2009.
     Training in Egyptian Contracting company( Mokhtar Ibrahim) 2010
    Personal Data
     Nationality: Egyptian
     Gender: Male
     Marital status: Single
     Military service: Completed
    Professional Membership
     Member in the Egyptian Syndicate of Engineers

    إعجاب

  18. اسلام هيكل | رد

    Islam Hikal
    Tel: +201022544574
    Tel: +201143825087
    E-mail: Dr_scientist2020@yahoo.com .
    Mrislamis34@gmail.com .
    PersonalInformation
    Name Islam Ahmed Ibrahim Hikal
    Address Diarb Negm,.Sharqia,Egypt.
    Date of Birth 1/8/1990
    Marital Status Single
    Marital Status Egyptian
    HVAC Engineer “load estimation by HAP “BMS. Air Balance
    Plumbing design &installation
    Fire-fighting Design
    BIM MEP Engineer .Revit Mep program

    إعجاب

  19. Ahmed Hamed Abd El-Khalek | رد

    Ahmed Hamed Abd El-Khalek
    , Cairo, Egypt.
    A7med7amed25@gmail.com
    (002) 012-74-99-87-50 (mobile) (002) 011-24-21-38- 52 (mobile)
    S U M M A R Y
    Junior Mechanical Power Engineer with good knowledge in HVAC system design, Cold store design, Fire Fighting system design, Medical gases pipeline system design, and Plumbing system design, Building Information Modeling (BIM), Power station, Supervision of man power. Preparing materials, drawings and Equipment required for erection to meet site priorities. And also following up project schedule and preparing punch lists.
    Core strengths in:
     Mechanical power engineering. 
     Revit MEP. 
     2D & 3D AutoCAD. 
     AutoCAD MEP
     Hap & Elite Software
     Microsoft Word, Excel and Access. 
     Research and development. 
     Continuous improvement with creativity
    E D U C A T I O N
    Degree Bachelor of Mechanical power engineering.
    Shoubra faculty of engineering 2013.
    Banha University.
    Overall grade: pass (64.4%).
    Graduation project Design Mechanical service in a commercial building by Revit MEP.
    (Air conditioning, firefighting & plumbing).
    Grade: Excellent.
    W O R K E X P E R I E N C E
    September – December 2013
    Project Banha Power Station 750 MW Combined Cycle Project Units 1&2 / cp-105.
    Position Technical office engineer.
    Company Eneregya for engineering and construction.
    Client Ansaldo Caldaie SpA – PGESCo / Bechtel.
    March 2014 – Tile now
    Office Engineering Office for Complementary Designs (Hany Tawfik Office).
    Position Plumbing & Firefighting Engineer.
    I N T E R N S H I P S
     A training certificate from Delta steel Mill Co. Training Summer 2011
     A training certificate from North Cairo Electricity Co. Training Summer 2012
     HVAC course in planet automation center. Course Summer 2013
    P E R S O N A L I T Y
     Can work under pressure
     High creativity & Multitasks
     Problem solving
     Ability to work in sites or offices
     Communication and presentation
     Leadership and working in teams
     Ability to travel anywhere
     Fast and self-learning
     Valid driving license
    L A N G U A G E S
     English: Good Writing & Speaking
     Arabic: Native
    I hope my date satisfies your needs References are available upon request

    إعجاب

  20. MOHAMED TAHA ABDLAAL ABO SALEH
    

    https://www.facebook.com/tito.eljokar.3

    BIOGRAPHY
    I’m a BIM SPECIALIST. Born in gharbia in 1987 . From 2009, I work in
    CAD /2D/ 3D Specialist / CAD Manager / BIM Instructor / at Engineering Syndicate and Engineering Center at the University of Kafr El-Sheikh and some private centers
    This experience includes architectural drawings,stractural design useing programs, architectural planning and detailing. Expert user in Revit, NAVISWORKS, AutoCAD and QTO.
    I have been working in many projects using BIM technique starting from the Conceptual Design up to Construction documents, this projects include a lot of types, such as Residential towers, mixed use building, Hospitals , Mosques, Villas and master plans, Interior & landscape
     OBJECTIVE
    Seeking a challenging entry-level opportunity in an international company in the field of architecture & engineering where I can acquire the technical experience that puts me on the right track, and where my interpersonal skills can be rectified and developed.
    SUMMARY OF COURSE :-
    • Course on “REVIT” .2008
    • Course on “AUTOCAD 2D/3D “.2007
    • Course on “NAVISWORKS” & “Quantity Takeoff” .
    • Course on some of the above -mentioned programs .
    • Course on “OFFICE & INTERNET”.
    • Course on “BUSINESS COMMUNICATION” with Dr. Ibrahim Elfiky.
    - BIM SUPPORT.
    • Provide production BIM support.
    • Develop, implement and enforce BIM standards.
    • Provide training and supervision of in-house BIM users.
    • Provide a budget for all BIM technology items.
    • Maintain BIM document archive and retrieval for projects.
    • Provide leadership and vision to the firm in the area of BIM.
    Computer Skills
    I have sufficient knowladge of the following programs :-
    Autodesk revit Architectural Auto cad structural Detailing  Photoshop Autodesk revit Structure  Robot structural Analysis Excel Advanced  Sap 2000 Quantity take off  NavisWorks  Etabs  Prokon Safe CSI COL Gear PCA COL  Auto CAD
    Interact with programs.:-

    CURRENT JOB.:-
    – Structural Designer at Office ” ALTABYA” Consulting Engineers. “Morning”
    – BIM Instructor at Engineering Syndicate for some program. ” Periods are not connected”
    Work Experience:-
    – Engineer design and supervision ” ALTABYA” Consulting Engineers ” FROM 6/2012 TILL
    new.
    – I have been involved in designing the University of Al-Ahsa in Saudi Arabia “12/2013″.
    – Office engineer technician” ALGOHRAReal Estate Investment” FROM 7/2009 TILL 5/2012.
    IN PLANNING DEPARTMENT. (EGYPT)
    – BIM Instructor at “Res&Enging.cons.center-kafrelsheikh university”FROM
    2009 TILL 2010 “Summer vacation” (EGYPT)
    Educational Information:-
    Bachelor of Civil Engineering – University, Kafr El-Sheikh
    Graduation project :- Design of Reinforced Concrete Structures – Excellent
    Activities.:-
    – I have Explain a lot of Software Engineering drawing video “Continuous Development”

    Language Skills:-
    Arabic (mother tongue)
    English (good … Writing, Reading)
     PERSONAL INFORMATION
    • Date of Twenty-sixth of July. 1987
    • Marital Status: Married.
    • Military Service: Finally Exempt

    إعجاب

  21. Abdel-Rahman Nabil Hashim Moustafa

    Address: Sharkia / Egypt

    Home: +2 0553668361 – Mobile: +2 01275505991

    E-mail: eng.zemos@yahoo.com

    Objective:

          Challenging career opportunity in the field of electrical power engineering where my previous technical experience and academic knowledge will be utilized and enhanced to contribute the progress of the company where I work.

    Education Data:

    ·  (2005- May 2010): Faculty of Engineering- Zagazig University

                 o  B.S. in Electrical Power Engineering

            ¤ 3rd year grade: good

            ¤ 4th year grade: very good

            ¤ Cumulative grade: good

    · Project : Design of Electrical Installation for Industrial Town

            ¤ Graduation project grade: Excellent

    Current Job:

    § Company  :    Cairo Metro

    § Title        :   Electrical Engineer

    § From         :   2 / 8 / 2011 till present                              

    § Field         :    Supervision and Execution of Electrical Works

    Job Description:

    1- Preparing Annually / Monthly / Daily Maintenance Schedules.

    2- Follow up Schedules Execution.

    3- Maintenance of Electrical Panels.

    4- Troubleshooting Removal.

    5- Technical evaluation for proposals of new projects.

    6- Follow up Project execution.

    7- Take over Electric work installation of new project from contractor.

    8- Preparing tender with technical specification.

    9- Review of the technical tasks of Tender Offers.

    10- Evaluation technicians and their financial incentive.

    Experience:

    § Electrical Engineer as Trainee at Consultant Office.

    o prepare drawings for buildings with all details : Distribution Lighting ,socket ,Distribution Board , Elevator Loads ,Sizing Transformer ,Single Line & Raiser Diagram ,VD. & SC. Calculation.

    Training and Certifications:

    1-  ALSTOM Transport SA. – Paris // 30 days // (CATENARY Installation / construction).

     

    2- Higher Diploma , Statistical Control and Quality Assurance

    Cairo University                            Completion Date: September 2012                            GPA: Very Good

     

    3- Ain Shams University//2 days//Setting and Configuration of Protective Devices of Rectifier Substations

     

    4- Jelecom Institute // 30 days // Power system Distribution.

     

    5- Society of Electrical Engineers//4days// Safety Applications in Electrical Field and Accidents Prevention

     

    6- Sadat Academy // 5 days // Development of Personal Skills for Engineers.

     

    7- Ministry Of Defense // 25 days // English Language Conversation Course .

     

    8- Jelecom Institute // 28 days // Auto CAD 2D.

     

    9- Cairo University – High Tech. Center // 34 days // Programmable Logic Controllers – PLCs

    Personal Information:

    Birth Date                                                   8 January 1988

    Gender                                                         Male

    Nationality                                                  Egyptian

    Military Status                                            Exempt

    Marital Status                                             Married

    Number of Dependents                              2

    Driving License Issued From                    Egypt

    Skills:

    ·  Language skills: 

                                           o  Arabic: Mother tongue

                                         o  English: very good spoken and written

    ·  Computer skills:

                                         o  Microsoft office (word, excel, power point)

                                         o  AutoCAD program

                                         o  (DIALUX / E-Tab) program

    ·  Soft skills:

                                                            o  Teamwork ability to communicate with team members and leadership.

                                                    o  Ability to work independently, hard worker, self-learner, and highly motived.

    Reference

    Available Upon Request

    إعجاب

  22. مهندس مدني تخرج من دمشق عام ١٩٩٠
    استشاري هندسة مدنية عام ٢٠١١
    مكتب خاص من عام ١٩٩٧ الى الوقت الحالي
    عضو بنقابة المهندسين فرع ريف دمشق

    إعجاب

  23. C. V.
    KAREEM GOUDA
    KAFR ELSHIKH – Egypt
    E-Mail: kareem_g@yahoo.com
    Mobile Numbers: 00966-564855025

    Title
    SENIOR “ARCHITECHUR,CIVIL” DRAFT MAN

    Education

                  TECHNICHAL DIPLOMA 2006.
    

    Summary
    Highly motivated, ambitious and creative architecture, civil draft man seeking to join
    Technical department team in an organization, maintain focus in demanding work
    Environments, under deadline and pressure conditions. Professionally committed and
    Responsible. Adapt easily to new situation. Successfully handle a wide range of
    Functions using a combination of creative and organizational skills.

    SUMMARY OF CAPABILITIES
    karim has (8 years) of experience in:
    … Construction fields of many projects.
    … architecture dwg.
    … structure dwg.
    … setting out for sites.
    … as built dwg.
    … implement of surfing work for new urban planning to the dwg.

    PROFESSIONAL EXPERIENCE

    • AlAlmuhaid co .
    • Address: Saudi Arabia ridhu .
    • Period : from 2009 –Till Now.
    • Position : senior draft man.
    • Main Projects : –

    Urban plan for many areas at middle area.
    Urban plan for many village and areas (hotat bny tamim , alhelwa, alhareeq).
    Land escape and squares for alhelwa city.
    Many private residential building.

    • Alam albenaa engineering and consultant.
    • Address: kafr elshikh,Egypt.
    • Period : from 2006 –2009
    • Position : draft man.
    • Main Projects : –

    Design and shop dwg for many private project
    Villas
    Towers
    Urban plan for many areas

    Skills:-
    • Languages:-
    • Arabic : Mother tongue
    • English : Good (R/W)

    • Computer :-
    • Office (Excel ) – (Excellent).
    • AutoCAD – (Excellent).
    • Photoshop
    • Internet (using and browsing) .

    Personal Data :-
    • Date of Birth :- 1 July 1987
    • Religion :- Islam
    • Nationality :- Egyptian
    • Martial Status :- single.
    • Driving License :- Have a valid Driving License (Saudi)

    References Furnished upon Request

    إعجاب

  24. Curriculum Vitae
    General information
    Name / Moustafa Awad Moustafa Ahmed
    Military service \ complete at 1/12/2014
    Nationality \ Egyptian
    Address \ 2nd Region – El Obour City – Egypt.
    E-mail \ eng.mostafawad@gmail.com
    Phone \ 0020108689091 – 0020244780915 – 01142457707
    Education

    Bachelor Degree at Civil Engineering from Faculty of Engineering Ain Shams University – Cairo – Egypt
    Department of Irrigation and Hydraulics 2013
    Graduation Project: Hydraulic Simulation and Analysis of Potable Water Networks (PWN)
    (Project of simulation and analysis the drinking water network at Al-Mokattam area to be able to provide the service until the target year from 2010 to 2040)
    Project’s appreciation: Excellent
    General appreciation: D
    Target
    – Work as an engineer designer for water supply systems, drainage systems, including pipe systems, culverts, and open channels.
    – Working as an executive engineer in projects of water.
    – Working as a site engineer.
    Skills

    Individual
    Do inventory and limited measurements as excel sheets.
    Design water supply, fire fighting, sewage daring, main water network and rain drainage network.

    Languages
    Arabic
    English

    Process
    Proficiency in dealing with the following programs:
    Microsoft Office
    AutoCAD 2D, 3D
    AutoCAD Civil 3D
    Revit Structure
    SAP2000
    Water CAD & Sewer CAD
    GIS ————– >Under training
    Primavera —– > Under training
    Training & Works
    – Training in “Team Work Office”, engineering construction and finishes – El Obour City – 2010/2011.
    – Training in “Farid Office for Engineering Consultancy” – Hassan Mammon St. – Nasr City , design of Plumbing and Firefighting 2011/2012
    – Work as site engineer in “Mabani Office for Construction Engineering” – El Obour City, 2012/ 2014
    – Work within the Corps of Engineers projects Armed Forces, as a site engineer and computer at operations military office 10/24/2013 until 01/12/2014.

    إعجاب

  25. OSAMA EBID / ARCHITECT
    Abu Dhabi, United Arab Emirates
    PHONE: +971 55 4698991 EMAIL: osama.ebid.sy@gmail.com

    A team player with academic qualifications, who has graduated with a degree in architecture. Possessing a proven ability to ensure projected architectural designs are functional, safe and economical and meet the needs of the client. Ensure that the project designs match their needs easy going by nature and able to get along with both work colleagues and senior managers.

    EDUCATION
    Bachelor’s degree in Architectural Engineering
    Ittihad University – 2012

    EXPERIENCE
     ARCHITECT ENGINEER
    AL AHAD Engineering Consultancy – Abu Dhabi, August 2015
    – Achieve client’s requirements, understand their concept, and needs.
    – Preparation of architectural concept, detailed drawings, 3D models and implantation economic, functional and environmental aspects.

     ARCHITECT ENGINEER
    JTAL Engineering Consultancy – Aleppo, September 2012 – July 2015
    – Understand client’s needs and requirements.
    – Arrangement of architectural concept and shop drawings.
    – Prepare 3D models designs.

     ASSISTANT ENGINEER
    Al-BASHAER – Housing Association – Aleppo, August 2008 – July 2012
    – Supervision of all construction works at site.
    – Review bill of quantities, specifications and submit monthly and final interim payments.

    SKILLS
    Navisworks Manage Experience more than 01 years
    Autodesk Revit Experience more than 05 years
    Autodesk AutoCAD Experience more than 10 years
    Adobe Photoshop Experience more than 10 years

    LANGUAGE
    – Arabic Native
    – English Intermediate

    ABOUT ME
    Date of Birth Nov 1984 – KSA
    Nationality Syrian
    Marital Status Single
    Residence UAE-Abu Dhabi
    Availability Immediately

    إعجاب

  26. SAMIR AHMED YOUSOF
    BIM Modeler / CAD Draftsman

    Mobile: 007-7026095482
    Email: samir_elfaruk@yahoo.com
    LinkedIn:https://www.linkedin.com/in/samir-ahmed-03911632

    <<<< QUALIFICATIONS SUMMARY >>>>

    • I have over 9 years experience in a draw the plans and elevations engineering in addition to prepared the section details to explain the industrial installing.
    • Create Revit families and their parameters which fit with requirements of each manufacturer.
    • All through my work in major construction projects in different areas, such as airports, factories, hospitals, universities , administration buildings and hotels etc …

      <<<< RESPONSIBILITIES >>>>
    

    • Preparing all needed shop drawings according to the equipment schedules.
    • Preparing all needed composite drawings.
    • Preparing all needed as built drawings according to site.
    • Drawing the details (3D) to explain fittings.
    • Review design drawings according to the equipment schedule.
    • Furnishing the chiller stations and Plantroom.
    • Design the duct works by McQuay program.
    • Create Revit families according to manufacturer submittal.
    • Create and modify MEP BIM models from hand sketches, design / IFC drawings.
    • Collaborate and coordinate with other disciplines design changes.
    • Work with various parties to update as-built model and 2Dsheet files through construction with changes on-site or from the client.

    <<<< EXPERIENCE >>>>

    Aug 2014 – Now.
    Arabtec Consolidated Contractors Joint Venture

    Sep 2012 – Aug 2014
    Engineering Consultant Group-ECG

    July 2010 – Sep 2012
    Saudi Bin Ladin Group

    Jan 2009 – July 2010
    Industrial Construction& Engineering Company-SIAC

    Jan 2007 – Jan 2009
    Design & Project Management Engineering

    <<<< COMPUTER SKILLS >>>>

    AutoCAD – Revit – Word – Excel – Power Point – McQuay

    إعجاب

المدونة الجديدة http://bimarabia.com/os/

Please log in using one of these methods to post your comment:

WordPress.com Logo

أنت تعلق بإستخدام حساب WordPress.com. تسجيل خروج   / تغيير )

صورة تويتر

أنت تعلق بإستخدام حساب Twitter. تسجيل خروج   / تغيير )

Facebook photo

أنت تعلق بإستخدام حساب Facebook. تسجيل خروج   / تغيير )

Google+ photo

أنت تعلق بإستخدام حساب Google+. تسجيل خروج   / تغيير )

Connecting to %s

%d مدونون معجبون بهذه: